Barah, Obinna Onyebuchi and Onyelowe, Kennedy and Olotu, Emmanuel B.O. and Didigwu, Chinedu Gerald and Okaford, Emeka Willington (2022) The Tribological Behaviour of Silumin Reinforced with Carbonized Plantain Fibre Ash Particulate for Possible Motorbike Parts Fabrication. British Journal of Multidisciplinary and Advanced Studies, 3 (1). pp. 29-43. ISSN 2517-276X(Print), 2517-2778 (Online)
![[thumbnail of document-10.pdf]](https://tudr.org/style/images/fileicons/text.png)
Text
document-10.pdf - Published Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.
Download (943kB)
Abstract
The management of waste products may reduce pollution and dumping sites.Therefore, one of the main goals of contemporary research is to recover these wastes through conversion into a more environmentally acceptable material that applies to fabrication engineering. This study demonstrated that waste products such as plantain waste are good reinforcement in the development of composite materials because it was found to be environmentally responsible and economically inventive. Materials made from agricultural waste appear amazing, showing immense potential and boosting green engineering. This research investigates the mechanical behaviours of silumin alloy reinforced with carbonized plantain fibre
(CPF) for developing motorbike clutch lever. The ISO standards sieve series specifications of 565 and 3310/1 were employed under the requirements of the American Society for Testing and Materials (ASTM). The different weight percentages of 2.5-10% of CPF were used to advance the investigated matrix composites. The morphology of the surface damage behaviour of the composites was investigated via scanning electron microscopy (SEM). The results of the mechanical property showed an increase in wear behaviour. The best signal-to-noise (SN) ratio, a criterion for evaluating the superiority features, was attained through Taguchi's robust design process and was
validated using Minitab18 software. The optimal wear value of 50.20g/min and the control factors are established for the composite.
| Item Type: | Article |
|---|---|
| Subjects: | T Technology > TA Engineering (General). Civil engineering (General) |
| Depositing User: | Professor Mark T. Owen |
| Date Deposited: | 03 Nov 2022 17:28 |
| Last Modified: | 03 Nov 2022 17:28 |
| URI: | https://tudr.org/id/eprint/1155 |
Actions (login required)
- View Item
CORE (COnnecting REpositories)
CORE (COnnecting REpositories)